External sewerage from PP and PVC-U pipes

Universal polypropylene sewer pipe with outer diameter of 110 mm can be used for laying at a depth acceptable for a given stiffness class for the purpose of removal of stormwater and other wastewater. Pipes made from unplasticized polyvinyl chloride UPVC (PVC-U) are intended for laying in depth. The temperature of the waste does not have long to exceed 60°C. Drainage pipes is part of the sewer network located in the area from the house to drain water. It is designed to divert water from residential areas. Its reliability is no less important than the reliability of the sewer inside the house. This is a necessary element of home improvement and one of the most important components of a comfortable existence. One of the most modern solutions for the construction of the outer sewage system is the use of polypropylene sewer pipes. In stock "Sinikon" there are two systems for outer sewage: polypropylene pipes and fittings SINIKON Universal and UPVC-pipes of its own production. Drainage pipes, created using polypropylene sewage pipes, has several important advantages: • increased strength; • ease; • corrosion resistance; • ease of installation; • wear resistance; • resistance to acid environments overgrowing walls, wear. These qualities are especially important if the outside sewer is laid in a place where a lot of sand, which often happens in country houses. Drainage pipes is not only the pipes but installed the observation wells for testing of the system. Overall — this is a much branched system composed of many elements. It is important that pipe as was durable and had a solid connection. Polypropylene pipes can be installed fairly quickly, they guarantee reliability. In addition, the use of polypropylene pipes allows you to stack them with smaller slopes, thus reducing the amount of excavation and, consequently, reduce the total cost of construction. Hence, another significant advantage of the outer sewage system of polypropylene pipes, — the economy. Thus, the drainage pipes of polypropylene is robust, durable and economical system. However, it is fully justified, it is necessary that the manufacturer can guarantee the quality of their products. The company "SINIKON" produces products that meet European quality standards, with certificates of compliance with all Russian and European standards. Plants "SINIKON" equipped with high-tech equipment that allows to optimize the production time without losing quality. Drainage pipes is not the only field of application of our systems. They are also used for the construction of internal, domestic and industrial sewage, non-pressure and storm. Service life - not less than 50 years. Purpose and scope Universal pipe made of polypropylene with a nominal outside diameter from 110 mm to 160 mm, suitable for installation: - in the inner systems domestic drainage of buildings at a maximum temperature of permanent drains 80°C and short term (within 1 minute) of wastewater with temperatures up to 95°C at a maximum flow of 30 l/min.; in the systems of external sewage, depth of installation, corresponding to the class of stiffness; in Sewerage systems and stormwater. When using pipes sewage should be guided by the following regulatory documents: SNiP 2.04.03-85 “Sewerage. External networks and constructions”, SNiP 3.05.04-85 “External networks and constructions of water supply and Sewerage”, SP 40-102-2000 “General requirements Water supply and Sewerage of polymers”.